Detailed Description - Bosch WEU PFS 3000-2 Notice Originale

OBJ_BUCH-2024-003.book Page 19 Thursday, April 2, 2015 10:48 AM
Symbols
Symbols and their meaning
The fine-spray system is "Wood" application:
suitable for glazes and Spraying solvent-based and
lacquers and for wall paints. water-dilutable lacquers, glazes,
primers, clear lacquers, wood
stains and oils
Step 1: Choose the grey nozzle cap 10
Choose the correct nozzle for a "wood" application
cap
Step 2: Select setting 1, 2 or 3 on the
Set the spraying capacity thumbwheel 4 for a "wood"
application
Step 3: Set "wood" application on the
Set the air flow sliding switch 24
Bosch Power Tools
The sticker regarding operation of the fine-spray system is located on the base station.
The correct interpretation of the symbols helps you operate the fine-spray system better
and more safely.
"Wall" application:
Spraying emulsion and latex
paints
Choose the white nozzle cap 9
for a "wall" application
Select setting 3, 4 or 5 on the
thumbwheel 4 for a "wall"
application
Set "wall" application on the
sliding switch 24
English | 19

Detailed description

See "Intended Use", page 20.
See "Changing the Nozzle
Cap", page 21.
See "Adjusting the Spraying
Capacity", page 23.
See "Adjusting the Air Flow",
page 23.
1 609 92A 162 | (2.4.15)