Technoline WS6825 Mode D'emploi page 10

During reception, the signal strength may move from 1 bar to 2 bars to 3 bars. This is normal since
the clock is detecting DCF signal and other signals in the air at the same time. Press the SET button
will return to the time display with
Successful reception or failed reception
Icon becomes static on (stop blinking) when reception is successful.
Icon disappears when reception is failed.
Automatic reception and manual reception
The station starts automatic reception everyday at 1:00, 2:00, and 3:00. If it fails to receive the DCF signal
at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it fails again, it
will start automatic reception at 1:00 again in the next day.
For manual reception simply press and hold the
and starts manual reception. Press and hold the
When the weather station is receiving the radio controlled time signal, the display will turn dimmer. It
will resume to the brightness level which you originally selected after the radio controlled time
reception is completed.
During DCF reception all buttons do not function and it does not take temperature measurement. The
temperature readings will get stable and become more accurate after the station clock is powered up
for around 30 minutes.
To cancel DCF reception permanently
Press and hold the
2 short beeps and the radio controlled function is permanently disabled.
To resume the radio controlled function, press and hold the
same time for 2 seconds, the station will give 2 short beeps and will start DCF reception immediately.
THE WEATHER FORECAST
The weather station has a built-in barometer which measures the barometric pressure. After power
up, the display shows SUNNY & CLOUDY icon. The weather station takes around 24 hours to gather
data of barometric pressure changes and predicts next 6-12 hours weather conditions.
There are four types of weather display in the weather station:
Sunny
Note: Moving the weather station within the house or in the vicinity will causing a sudden change in
the attitude of the station and it affects the accuracy and correctness of the weather forecast. After
the weather station is powered up, it will take around 24 hours to get stable. The weather icons on
the display give a reference to the next 6-12 hours weather conditions. It may not match with the
current weather condition outside.
icon flashing.
/ WAVE and the
Sunny & Cloudy
/ WAVE button, the station will gives a short beep
/ WAVE button to stop DCF reception.
button at the same time for 2 seconds, the station will give
Cloudy
/ WAVE and the
Rainy
button at the