Other Settings Installer; Factory Setting - Brink Renovent Excellent 400 Consignes D'installation

Putting into operation
for 50, 100, 200 and 300 m 3 /h respectively. The performance and
the energy consumption of the Renovent Excellent depend on the
Important:
3
Mode : is 0 or 50 m /h (not in combination with a 3-way
switch).
Mode 1: must always be lower than mode 2.
Mode 2: must always be lower than mode 3;
Mode 3: adjustable between 50 and 400 m
higher mode will automatically be adjusted.

7.3 Other settings installer

Various other settings of the Renovent Excellent can also be

7.4 Factory setting

ting in one go.
Renovent Excellent was supplied from the factory; all message
codes / fault codes will be erased from the service menu as
well.
All manuals and user guides at all-guides.com
3 /h;
-
Renovent Excellent
Chapter 7
press > 10 sec.
simultaneously
3 sec. visible
operating mode
6259-A
21