Setting Values - Brink Renovent Excellent 400 Consignes D'installation

Setting values

STEP
DESCRIPTION
NO.
Extract fan mode
20
switching input 1
21 Selection input 2
22 Minimum voltage input 2
23 Maximum voltage input 2
Conditions
24
switching input 2
Supply fan mode
25
switching input 2
Extract fan mode
26
switching input 2
27 Geo heat exchanger
Minimum temperature
geo heat exchanger
28
(Below this temperature
the valve opens.)
Maximum temperature
geo heat exchanger
29
(Above this temperature
the valve opens.)
without prior notice.
All manuals and user guides at all-guides.com
FACTORY SETTINGS
ADJUSTING RANGE
RENOVENT EXC. PLUS
0 (= Extract fan off)
2 (= Flow rate mode 1)
5 3 (= Flow rate mode 2)
4 (= Flow rate mode 3)
5 (= Multiple switch)
OFF ( = Switching input 2 active)
ON
ON (= 0 - 10 volt input 2 active)
0.0 V 0.0 volt - 10.0 volt
10.0 V 0.0 volt - 10.0 volt
0 (off)
1 (on)
2 (= On if conditions
0
3 (= Bypass control)
4 (= Bedroom valve)
0 (= Input fan off)
2 (= Flow rate mode 1)
5 3 (= Flow rate mode 2)
4 (= Flow rate mode 3)
5 (= Multiple switch)
0 (= Extract fan off)
2 (= Flow rate mode 1)
5 3 (= Flow rate mode 2)
4 (= Flow rate mode 3)
5 (= Multiple switch)
OFF (= Valve control geo heat
OFF
ON (= Valve control geo heat
5.0 °C 0.0°C - 10.0°C
25.0 °C 15.0 °C- 40.0 °C
Renovent Excellent
3 /h)
3
/h)
3
/h)
exchanger off)
exchanger on)
Chapter 13
DISPLAY TEXT +
STEP
CN1
V2
0.5 V V2 MIN
0.5 V V2 MAX
CN2
CN2
CN2
EWT
0.5 °C EWT T-
0.5 °C EWT T+
39