Installation - AYA TI05B Instructions D'utilisation

2.INSTALLATION

DIMENSION FOR RECESSING IN
4 zones induction hob
Caution
Good ventilation is required around the appliance for easier dissipation of
heat and low power consumption.
Sufficient clearance is required around the appliance.
The appliance should not be placed near anything that may echo
IMPORTANT
The distance from the back edge of the hole to the wall or
cabinet must be at least 100 mm. If the cooker is thicker
than 30 mm, or if it is recessed in a worktop, the
ventilation cover must be fitted as shown in the
diagram below.
MPORTANT
The induction hob must be well ventilated and the air inlet and outlet must not
be blocked.
POSITIONING
ABOVE A DRAWER
The electrical circuits in the cooker must have an adequate circulation of
air in order to be correctly cooled. Pay attention to the points below. A
larger distance between the appliance and an underlying cabinet ensures
better functionality.
IMPORTANT
The appliance must be provided with an air inlet at
the back and air outlet at the front.
ABOVE A CUPBOARD WITH DOOR
When the air outlet is under the appliance:
A: An air outlet grille should preferably be placed
between the appliance and the cabinet door. This is
easy if the crosspiece is thin.
70
min 38
cabinet
-17 -
.
9.5cm
10mm min