Electrical Connection - AYA TI05B Instructions D'utilisation

B: If the crosspiece is thick or too close to the
appliance, saw the crosspiece at an angle to
facilitate the flow of air.
The appliance can be installed directly above
ovens of the same brand. These ovens have
ventilation systems at the top and can therefore
be installed high up. Remove the crosspiece on
the cabinet to obtain a free space of at least 5 cm.
IMPORTANT: Never place the appliance
over a dishwasher, washing machine,
fridge or freezer.

3.ELECTRICAL CONNECTION

The appliance is supplied with a power cord.
A damaged power cord must be replaced by an electrician or other qualified
person to ensure it is safe to use.
If the mains supply where the appliance is to be installed is different from
22 0 -240V~, make the connection as shown in the enclosed diagrams. (The
cable must be able to withstand temperatures of 120 °)
The connection must be earthed and provided with an accessible all-pole
switch with a minimum contactor distance of 3 mm.
Technology date
HOB
4 induction
Single phase : 220-240 VAC
Voltage: 220-240
Total power :7.2Kw
Blue
Brown
L
32A
Voltage Total power
7.2KW
220...240V
Black
Gray
Green/
yellow
N
-18-
45°
40mm min
Oven in high position
Nominal power
Protection
per phase
31.5A 32A
2x230VAC 2L+2N~ –16A
separate the wires before connection
Voltage:220-240 VAC
Rated current pet phase :15A
Fuse:32A
Black Grey
Brown
Blue
L L N
5mm min
Green/
yellow
N