Checklist Before Start-Up - Zipper Maschinen ZI-BRM420 Manuel D'utilisation

Checklist before Start-up

The use of paint thinners, petrol, aggressive chemicals or abrasives leads to material
damage to the surfaces! Therefore use only mild detergents for cleaning!
Clean the machine and remove dirt and grass if necessary.

If the air filter is dirty, blow the filter cartridge from the inside by moving a jet of dry

compressed air up and down. Continue until all dust has been removed. Replace the
air filter with a new one if necessary.
Check the carburettor for external dirt and dust and clean it with dry compressed air if

necessary.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BRM420 und ZI-BRM508
6. Assembly/Dismounting Mulch Plug
The mulching plug (2) is used to redesign
the inside of the mower for more efficient
mulching. Install and remove the
mulching plug (1) by lifting the rear
discharge guard (2) as shown. The mulch
plug (1) will only fit in one direction.
Remove the mulch plug (1) when using
the grass collector.
7. Locking Rear Discharge Flap
To lock the rear discharge flap, use
brackets as shown.
8. Assembly lateral discharge (only for ZI-
BRM508)
Raise the side guard (1) and mount the
side discharge as shown.
NOTICE
ASSEMBLY
31