Operating Instructions; Understanding The Control Panel; Start/Pause Button - Haier GDG900AW Guide D'utilisation Et Instructions D'installation

All manuals and user guides at all-guides.com

OPERATING INSTRUCTIONS

Understanding the Control Panel

9
Note: Features may vary per model.

Start/Pause Button: (1)

• Press the button to turn the dryer ON. Press this button once to start the dry
process. Press this button once again to pause the activity during the dry cycle.
Off Button: (2)
• Press the button to turn dryer off.
Signal Button: (3)
• Selects buzzing volume or turns off the buzzer. You can choose louder, softer,
or off.
Temp Button: (4)
• Used to set drying temperature. There are 4 available drying temperatures:
High, Medium, Low, and No Heat (Air Dry).
Sensor Dry Level Button: (5)
• Used to set drying level of auto-programs. If no auto-program is selected,
pressing the button will cause the chime to sound. There are 5 selections: Very,
More, Normal, Less, Damp.
Wrinkle Saver Button: (6)
• This convenient feature helps keep wrinkles from setting when you cannot
unload the dryer at the end of a cycle. The dryer will stop and then tumble
for a brief period every few minutes. Press the wrinkle saver button to choose
the number of hours required, from 3 to 24. Stop the setting at any time by
pressing the wrinkle saver button or opening the dryer door.
• If not set, the wrinkle saver indicator is off and remaining time indicator is on.
• The LED display indicates the remaining time of non-reserved program. If setting
"Wrinkle Saver" in standby status, the LED display indicates 3 hr, which will
increase by 1 hr with each press until 24 hours is reached It will then return to
3. If held for 1.5 seconds, the LED display indicated value will
increase continuously.
Extend T umble
8 10 7 6 11
Very
More
Normal
Less
Damp
5 4 3 2 1
English
14