Explanations Of The Vaping Modes - InnoCigs CUBOID LITE Manuel D'utilisation

INNOCIGS CUBOID LITE – EXPLANATIONS OF THE VAPING MODES
All manuals and user guides at all-guides.com
VW Mode (Variable Wattage)
The VW mode supports vaporizer heads in a resistance range of 0.1 ohm to 3.5 ohms. The power which is deliver-
ed to the atomizer head can be regulated by adapting the voltage according to the power specification.
TC Mode (Temperature Control | Variable Wattage)
In TC-Ni, TC-Ti and TC-SS modes, the device supports heads with coils made of nickel (Ni200), titanium (Ti),
and stainless steel (SS316) with a resistance of 0.05 ohm to 1.5 ohms. The temperature can range between
100°C and 315°C or 200°F and 600°F in TC mode, depending on the vaporizer head being used.
TCR mode (Temperature Coefficients of Resistance)
In TCR mode (M1, M2, M3), the device supports heads made of nickel (Ni200), titanium (Ti), nickel iron (NiFe), and stainless
steel (SS) with a resistance range of 0.05 ohm to 1.5 ohms. Depending on the atomizer head used, the temperature can range
between 100°C and 315°C or 200°F and 600°F in TCR mode. This mode allows you to select different temperature coefficients
of the wire or to operate with different TCR values.
Please note that the resistance of the vaporizer head used must be set before it is first used in TC/TCR mode.
61