Schluter Systems DH E RS D/BW Guide De L'utilisateur page 2

Before installing and operating this product, the owner
and/or installer must read, understand and follow
these instructions and keep them handy for future
reference. If these instructions are not followed, the
warranty will be considered null and void and the
manufacturer deems no further responsibility for this
product. Moreover, the following instructions must
be adhered to in order to avoid personal injuries or
property damages, serious injuries and potentially
fatal electric shocks. All electric connections must
be made by a qualified electrician, according to the
electrical and building codes effective in your region.
Do NOT connect this product to a supply source other
than 120 VAC, 208 VAC or 240 VAC, and do not exceed
the specified load limits. Protect the heating system
with the appropriate circuit breaker or fuse. You
must regularly clean dirt accumulations on or in the
thermostat. Do NOT use fluid to clean thermostat air
vents. Do NOT use where exposed to water.
1. Description
The DH E RS D/BW electronic thermostat can be used to control
heating floors with electrical current − with a resistive load −
ranging from 0 A to 16 A at 120/208/240 VAC. It has an easy
user interface and can manage up to four programming periods
a day. It keeps the temperature of a room (
floor ( mode) at a requested set point with a high degree
of accuracy.
Floor Mode
in areas where you want a warm floor at any time and when
the temperature of the ambient air can be high without causing
discomfort. For example, in a bathroom.
2
WARNING
(factory setting): this control method is ideal
WARNING
mode) and a