Schluter Systems DH E RS D/BW Guide De L'utilisateur page 12

deactivate it following the above procedure if needed.
Copy of the Programming
You can apply the programming of one day of the week to other
days by copying the programming day by day or in block.
To copy the programming day by day, you must:
1. Press down the source day button (day to be copied).
2. Hold down this button and press down the destination days one
by one. The screen displays the selected days. If an error occurs
when you are choosing a day, press down the erroneous day
again to cancel the selection.
3. After all selections are completed, release the source day
button. The selected days have the same programming as the
source day.
To copy the programming in block, you must:
1. Press down the source day button, hold it and press down the
last day of the block you want to copy.
2. Hold down these two buttons for 3 seconds. After this time,
the days of the block are displayed indicating that the copy in
block is activated.
3. Release the buttons. The days of the block are not displayed
anymore and the current day is displayed.
Note: The block order is always increasing. For example, if the
source day is Thursday and the destination day is Monday, the
copy will only include Friday, Saturday, Sunday and Monday.
12