Care And Maintenance - Philips SmartSleep Manuel D'utilisation

Viewing your Sleep Data
Note
The status indicator light will turn off 30 minutes after charging is complete. If
this happens, press the headband power button for 1 second to "wake" it before
syncing.
4. To view your sleep data, press the power button on the headband for 1 second. Then,
open the mobile application on your phone.
5. Press the "sync"
must be within Bluetooth range of your headband in order to sync.
If you miss syncing in the morning, your data will be saved and can sync with your app
the next time you have the device on and the app open at the same time.

Care and Maintenance

Cleaning
Caution
Do not submerge the headband in water. This will damage the internal electrical
components and speakers.
Weekly
Ensure the device is turned off and is not connected to the USB cable and charger before
cleaning.
1. Forehead Sensor Cleaning
a. Remove the forehead sensor from the forehead sensor band by untucking the
ends and unsnapping it from the band.
button on your phone screen to begin the data syncing. You
11