Pebblestone Set - Dru BASSO-01 Instructions D'installation Et Mode D'emploi

INSTRUCTIONS FOR INSTALLATION

Pebblestone set

The pebblestone set consists of naturally coloured
vermiculite, white carrara stones and a rack.
• Place the rack, see Photo (fig. 5a);
• Fill the burner tray with vermiculite; equally spread the
vermiculite, see Photo (fig. 5b).
NB: - You can influence the flame image by moving the
vermiculite, yet;
- the burner deck has to remain covered with
vermiculite in order to prevent that the life
expectancy of the burner is reduced
D
B
G
38C-2097
fig. 5a
A
H
E
F
fig. 4b
• Fill the burner tray and the tray surrounding the burner
with carrara stones;
• Spread the carrara stones equally over one layer, see
Photo (fig. 6);
• Place the 12 big pebblestones on top of the small
pebblestones; see Photo (fig. 6);
20
D
C
fig. 5b
fig. 6