SilverCrest SKD 2300 B2 Mode D'emploi page 9

The metal surfaces of the appliance can become hot.
■
GB
Therefore, only hold the appliance by the handles
IE
All repairs must be carried out by authorised specialist com-
■
panies or by the Customer Service department. Improper re-
pairs can pose significant risks to the user. It will also invali-
date any warranty claims.
Defective components must always be replaced with original
■
replacement parts. Only by using original replacement parts
can it be assured that the safety requirements are being com-
plied with.
Protect the appliance from penetration by moisture and liquids.
■
Always unplug the appliance from the mains power socket
■
before cleaning.
Always disconnect the power cable from the mains power
■
socket by pulling on the plug; never pull on the cable.
Avoid using extension cables.
■
Do not use the appliance in the vicinity of naked flames.
■
The appliance must not be placed immediately under or over
■
a mains power socket.
Do not use this heater together with a programmable switch,
■
a timer, a separate remote control system or any other system
which switches on the heater automatically, as this could lead
to a fire risk if the heater is covered or set up incorrectly.
Disconnect the plug from the mains power socket if the appli-
■
ance malfunctions and also during thunderstorms.
The appliance must not be used in the immediate vicinity of
■
a bath, a shower or a swimming pool.
The appliance is to be installed so that a person in the bath
■
or shower is unable to touch the switch and other controls.
Do not expose the appliance to spray and/or dripping water
■
and do not place any objects filled with liquid, such as vases
or open drink containers, on or near the appliance.
6
All manuals and user guides at all-guides.com
.
9
SKD 2300 B2