Table des Matières
Publicité
Identifier
Version
Status
Fan cooling module LEDs
See the ME484 JBODStorage System Owner's Manual for a visual description of the LEDs on each Fan Cooling Module (FCM).
Tableau 6. FCM LED descriptions
LED
Status/description
Module OK
Constant green indicates that the FCM is working correctly. Off indicates that the fan module has failed. Follow the
procedure in ME484 JBOD Storage System Owner's Manual to replace the fan controller module.
Fan Fault
Amber indicates the fan module has failed. Follow the procedure in ME484 JBOD Storage System Owner's Manual to
replace the fan controller module.
Identifier
Version
Status
Ops panel
The front of the ME484 JBOD storage enclosure has an Ops panel that is located on the left ear flange of the chassis.
The Ops panel is an integral part of the enclosure chassis, but is not replaceable on site. See the ME484 JBOD Storage System Owner's
Manual for a visual description of the Ops panel .
Tableau 7. Ops panel functions
Indicator/LED
Unit identification display
(UID)
System power on/Standby
LED
Module fault LED
Logical status LED
Top drawer fault LED
Bottom drawer fault LED
PRÉCAUTION :
The sideplanes on the enclosure drawers are not hot swappable or customer serviceable.
Identifier
Version
Status
PSU LEDs
See the ME484 JBOD Storage System Owner's Manual for a visual description of the Power Supply Unit (PSU) module faceplate.
18
Voyants
GUID-930C190A-DDF7-44B2-BC12-287D125712D9
3
In translation
GUID-B23C130B-C1C6-4F40-BE54-F1C7C465E897
4
In translation
Status/description
Dual seven-segment display that shows the numerical position of the ME484 JBOD storage enclosure in
the cabling sequence.
● Constant green: power is available (operational).
● Constant amber: system in standby (not operational).
Constant or blinking amber: system hardware fault present
REMARQUE :
This LED helps you identify the component causing the fault, which can be associated
with a Fault LED on an IOM, PSU, FCM, DDIC, or drawer.
Constant or blinking amber: change of status or fault present
REMARQUE :
The LED is typically associated with a DDIC. Use the LEDs at each disk position within
a drawer to identify the DDIC affected.
Constant or blinking amber: fault present in drive, cable, or sideplane
Constant or blinking amber: fault present in drive, cable, or sideplane
GUID-22DE888A-8BDE-4105-968A-23CF5A2D192F
4
In translation
Publicité
Table des Matières
