Safety Instructions; Frequently Asked Questions - i-tec U3METALDOCK Mode D'emploi

USB 3.0 Metal Docking Station
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO A
MACBOOK / PC)
1) Turn ON the MacBook / PC and connect the power adapter to the docking station.
2) Connect the power adapter to the AC 110 V / 230 V mains.
3) Connect the USB 3.0 cable to the USB port type B on the back panel of the docking
station.
4) Connect the USB 3.0 cable to a free USB 3.0 / 2.0 port of your MacBook / PC.
5) Subsequently, the automatic installation of the ports in the individual systems will
start.
6) After the completion of the installation restart the MacBook / PC.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and falling to the
ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
6 |
ENGLISH