Safety Instructions; Frequently Asked Questions - i-tec C31FLATDOCKPDV2 Mode D'emploi

INSTALATION OF DRIVERS
After connecting, the drivers for the docking station are installed automatically from
the system.
CAUTION! Before installation make sure that your system has installed the latest drivers
for your device and updated BIOS.
The majority of problems with the docking station and the connected peripheral devices
can be solved by disconnecting the USB-C cable of the docking station from the USB-C
port of the PC / Mac / smartphone and reconnecting after approximately 10 s.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and falling to the
ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
Quick Start
| 9
ENGLISH