Product Care - dji MATRICE 200 V2 Serie Mode D'emploi

4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers,
etc.) to remove or install the propellers.
5. Ensure the propellers are securely mounted to prevent them
from falling off the motors.
6. DO NOT turn on the motors when propellers are mounted and
there are other people or animals in the immediate vicinity.
7. Using third-party propellers may compromise the aerodynamics
of the aircraft. For a better and safer flight experience, we
recommend you to use original DJI propellers only.
8. Wipe the propellers to make them dry before each flight where
the surrounding temperature is around 0℃ (32℉) to avoid the
propellers from having frosted.
Motors
1. Ensure the motors are securely mounted and rotating smoothly.
2. DO NOT attempt to modify the structure of the motors.
3. DO NOT touch or let your hands or body come in contact with
the motors after flight as they may be hot.
To avoid possible serious injury and property damage, observe the
following rules:
1. DO NOT block any of the ventilation holes on the motors.
2. DO NOT block any of the ventilation holes on the frame arm of
the aircraft.
Motors
1. Keep the motors free of dust.
2. If a motor is stuck and unable to rotate freely, execute the CSC
(Combination Stick Command) to stop the motors immediately.
Electronic Speed Controllers
Ensure the ESCs sound a normal tune when powered on.
DJI Pilot App
1. Be sure to fully charge your tablet or mobile device before
launching the app. CRYSTALSKY™ is recommended for a better
experience.
2. If you are using a phone as your mobile display device, be sure
to continue flying safely when the phone receives an incoming
call. DO NOT accept phone calls during flight.
3. Mobile cellular data is required when using the DJI Pilot app.
Please contact your wireless carrier for data charges.
4. Read all prompted safety tips, warning messages, and
disclaimers carefully. Be familiar with the related regulations
in your area. You are solely responsible for being aware of all
relevant regulations and flying in a way that is compliant.
a. Read and understand the warning messages before using
the Auto-take off and Auto-land feature.
b. Read and understand the warning messages before re-
setting your Home Point.
c. Read and understand the warning messages and disclaimer
before setting the altitude beyond the regulatory limit.
d. Read and understand the warning messages and disclaimer
before switching between the flights modes.
5. Land your aircraft immediately at a safe location if there is an
alert shown on the app.
6. Examine and check all warning messages on the checklist
displayed in the app prior to each flight.
7. Use DJI ASSISTANT 2 or DJI Flight Simulator to practice your
TM
flight skills if you have never operated the aircraft or if you DO
NOT have sufficient experience to be comfortable operating the
aircraft.
8. Cache the map data of the area where you intend to fly the
aircraft by connecting to the Internet before each flight.
9. The app is designed to assist your operation. Please use your
sound discretion and DO NOT rely on the app to control your
aircraft.
10. Your use of the app is subject to the DJI Pilot app Terms of
Use and DJI Privacy Policy. Please read them carefully in the
app.
8
Firmware
To avoid serious injury to children and animals, observe the
following rule:
Keep children and animals at a safe distance during any firmware
upgrade, system calibration, and parameter setting procedures.
1. For safety, always update the firmware to the latest version when
an upgrade notification is shown in the DJI Pilot app.
2. Firmware upgrade notifications will inform about new firmware
upgrades. You are required to read and understand the
information shown.
3. Be sure to update the remote controller's firmware to the latest
version after you update the aircraft's firmware.
4. The remote controller may become unlinked from the aircraft
after updating.
5. Be sure to check all connections and remove the propellers
from the motors before performing the firmware update.
Camera (Optional)
To avoid possible serious injury and property damage, observe the
following rule:
DO NOT block any ventilation holes on the camera as the heat
generated may hurt you and damage the device.
1. Check camera settings before use to make sure you can adjust
them to fit your needs.
2. Test the camera by shooting a few test images and check that
it is operating correctly before shooting important pictures or
videos.
3. DO NOT remove the microSD card from the aircraft or from
the gimbal camera when it is powered on. Please use officially
recommended microSD cards.
4. Be sure to power off the Intelligent Flight Battery correctly,
otherwise your camera parameters will NOT be saved and any
recorded videos may be damaged
5. Regardless of the reason, DJI will not be responsible for any
failure of an image or video to be recorded or having been
recorded in a way that is not machine readable.
Gimbal (Optional)
1. Precision elements in the gimbal may be damaged in a collision
or impact, which may cause the gimbal to function abnormally.
2. DO NOT apply external force to the gimbal after the gimbal is
powered on.
3. DO NOT add any payloads to the gimbal, as this may cause the
gimbal to function abnormally or even lead to motor damage.
4. The gimbal and gimbal connector are very delicate. Handle with
care and DO NOT touch the gimbal connector, as any damage
will cause it to function abnormally.
5. Hold the gimbal firmly when detaching or reattaching it, so it
does not drop.
6. DO NOT attach or remove the gimbal with the aircraft powering
on.
7. When use single upward gimbal and dual downward gimbals,
ensure to strictly follow the instruction on the User Manual,
mounting compatible gimbal cameras correctly, or the image
transmission may fail.

Product Care

Storage and Transportation
To avoid serious injury to children and animals, observe the
following rule: