Adjusting The Stands - Grundig GWN21210X Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 179
If the current value of the fuse
or breaker in the house does
not comply with the value in the
rating plate, have a qualified
electrician install a suitable
fuse.
The specified voltage must be
equal to your mains voltage.
Do not make connections via
extension cables or multi-plugs.
WARNING:
B
power cable must
be replaced by the
Authorised Service
Agents.
WARNING:
product has a failure, it
B
should not be operated
unless it is repaired by
the Authorised Service
Agent! There is the risk of
electric shock!

3.4 *Adjusting the stands

If the product is not in balanced position,
adjust the front adjustable stands by rotating
right or left.
*If your product does not have a wine
compartment or is not a glass door , your
product does not have adjustable stands,
the product has fixed stands.
10
To adjust the doors vertically,
Loosen the fixing nut located at the
bottom.
Rotate the adjusting nut according to
the position of the door (clockwise/
counter-clockwise).
Tighten the fixing nut in order to fix
the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the
Damaged
top.
Rotate the side adjusting nut
according to the position of the door
(clockwise/counter-clockwise).
Tighten the fixing nut which is at the
If the
top in order to fix the position.
adjusting nut
fixing nut
fixing nut
adjusting nut

Publicité

Table des Matières
loading

Table des Matières