Tripp-Lite SmartPro SMART550USB Manuel Du Propriétaire page 5

Quick Installation
These connections are optional. The UPS will function properly without these connections.
1
Phone Line/Network Line Surge
Suppression
The UPS has jacks which protect against
surges over a phone or network data
line.
Using telephone cords as appropriate,
connect the wall jack to the UPS jack
marked "IN." Connect equipment to the
UPS jack marked "OUT." Make sure the
equipment connected to the UPS jacks
is also protected against surges on the
AC line.
2a
USB Communications
Use any USB cable to connect the
computer's USB port to the USB port
of the UPS. PowerAlert software can be
obtained for free via the Web at
www.tripplite.com. Download the
software to your computer and follow
the installation instructions.
2b
RS-232 Communications
(Select Models Only)
Use any DB9 cable to connect the
computer's DB9 port to the DB9 port
of the UPS. PowerAlert software can be
obtained for free via the Web at
www.tripplite.com. Download the
software to your computer and follow the
installation instructions.
18-06-122-932616.indb 5
NORM
1
2a
NORM
2b
5
DELAY
NORM DELAY
DELAY
7/12/2018 4:39:33 PM