The Child Safety Device; Power Management Function; Hints And Tips - AEG HK894400XG Notice D'utilisation

Table de cuisson
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12
www.aeg.com

4.13 The Child Safety Device

This function prevents an accidental
operation of the hob.
To activate the function: deactivate the
hob with
down touch
message, that the function operates.
To deactivate the function: activate the
hob with
To override the function for only one
cooking time: activate the hob with
Touch
and
the heat setting in 10 seconds. You can
operate the hob. When you deactivate
the hob with
again.
4.14 Deactivation and
activation of the sounds
Activate the hob. Touch
the sound menu with arrows. Touch
to confirm . Set the option with the
arrows. Touch
When the function operates you can hear
the sounds only when:
• you touch
• Minute Minder comes down
• Power-off timer comes down

5. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
5.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
. When the hob is shutting
. The display shows a
. Touch
and then
at the same time. Set
the function operates
and then set
to confirm.
• you put something on the control
panel.
4.15 Power management
function
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
.
loading of 3700 W.
• The function divides the power
between cooking zones connected to
.
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
made of multi-layer (with correct mark
from a manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
zone set to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Cookware dimensions

Publicité

Chapitres

Table des Matières
loading

Table des Matières