Timer; Stop+Go; Lock; The Child Safety Device - AEG KFA58SIM Notice D'utilisation

Masquer les pouces Voir aussi pour KFA58SIM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

48
Operating instructions

Timer

Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch
cooking zone comes on.
• To activate or change the Timer: touch
99
minutes). When the indicator of the cooking zone starts to flash slow, the time
counts down.
• To deactivate the Timer: set the cooking zone with
Timer. The remaining time counts back to
out.
• To see the remaining time: set the cooking zone with
zone starts to flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates and
activates.
• To stop the sound: touch
You can use the Timer as a minute minder while the cooking zones do not operate. Touch
. Touch
00
and
flashes
• To stop the sound: touch

STOP+GO

The
function sets all cooking zones that operate to the lowest heat setting (
When
operates, you cannot change the heat setting.
The
function does not stop the timer function.
• To activate this function touch
• To deactivate this function touch

Lock

When the cooking zones operate, you can lock the control panel, but not
accidental change of the heat setting.
First set the heat setting.
To start this function touch
The Timer stays on.
To stop this function touch
When you stop the appliance, you also stop this function.

The child safety device

This function prevents an accidental operation of the appliance.
To activate the child safety device
• Activate the appliance with
• Touch
for 4 seconds. The symbol
• Deactivate the appliance with
All manuals and user guides at all-guides.com
or
to set the time. When the time comes to an end, the sound operates
. The symbol
. The heat setting that you set before comes on.
. Do not set the heat settings.
again and again until the indicator of a necessary
or
of the timer to set the time (
00
. The indicator of the cooking zone goes
. The symbol
comes on.
. The heat setting that you set before comes on.
comes on for 4 seconds.
comes on.
.
and touch
to deactivate the
. The indicator of the cooking
00
flashes. The cooking zone de-
. It prevents an
00
-
).

Publicité

Table des Matières
loading

Table des Matières