Displays - Baxtran STD Manuel D'usager

STD
A secondary function
other functions.
HOLD
Reading lock key, use this key to lock reading, in calibrate mode, use this key to change decimal po-
int.
Secondary function
M+
To print the results to a PC or printer using the optional RS-232 interface. It also adds the value to the
accumulation memory if the accumulation function is not automatic.
Secondary function (C or
values for parameters or other functions.
UNIT O U
Press this key to select the weight unit. Move the active digit left when setting values for other
functions.
Secondary function
mode.
ON/OFF
Turn on or off the power.
The LCD display will show a value and a unit to the right of the digits. In addition there are labels for
TARE, GROSS weight, Zero and for Low battery.
Check
Weighing
, of incrementing the active digit when setting a value for parameters or
, in the setting mode, this key used to move active digits right.
), is to act as a clear key or to move active digits left when setting
, is to return to normal operation when the scale is in a parameter setting
Stable
User's Guide

5. DISPLAYS

Battery
Low
Weighing
Unit
21