Using The Wide Panel - Hahnel MODUS 600RT MKII Mode D'emploi

Catchlight
With the catchlight panel, you can create a catchlight in the subject's
eyes to add life to the facial expression.
ZOOM: Setting the Flash Coverage and

Using the Wide Panel

The flash coverage can be set automatically or manually. It can be
set to match the lens focal length from 20 mm to 200mm. Also, with
the built-in wide panel, the flash coverage can be expanded for 14mm
wide-angle lenses.
• If you set the flash coverage manually, make sure it covers the lens
focal length so that the picture will not have a dark periphery.
Using the Wide Panel
Modus 600RT - English
• If the wall or ceiling is too far
away, the bounced flash might
be too weak and result in
underexposure.
• The wall or ceiling should be
a plain, white color for high
reflectance. If the bounce
surface is not white, a color
cast may appear in the picture.
1. Point the flash head upward
by 90°
2. Pull out the wide panel. The
catchlight panel will come
out at the same time
3. Push the wide panel back in
• Push in only the wide panel
• Follow the same procedures
as for bounce flash
In Manual Zoom mode, press
the <ZM/C.FN> button.
• Turn the Select Dial to
change the flash coverage
• If < > is displayed, the
A
flash coverage will be set
automatically
Pull out the wide panel and
place it over the flash head as
shown. The flash coverage will
then be extended to 14 mm.
• The catchlight panel will
come out at the same time.
Push the catchlight panel
back in.
• The <ZOOM/C.FN> button
will not work.
37