Master Unit Flash On/Off; Slave - Modus 600Rt - Hahnel MODUS 600RT MKII Mode D'emploi

Master Unit Flash ON/OFF

You can switch ON or OFF the "Master" unit flash that is controlling the
wireless "Slave" units. When Master flash is ON, it will flash as group A
Setting the DCM
(Digital Channel Matching)
Initialy the Modus 600RT wireless 2.4GHz is set to a general "open
channel" and can be used as it is. To avoid interference with other
wireless flash systems we recommend to DCM (digital channel match)
your Modus 600RT speedlight's and Viper TTL.
Master – Viper TTL or Modus 600RT

Slave - Modus 600RT

24
1. Press Function Button 4 so
that <
MENU2
on the LCD panel
• 2. Press Function Button
/
• < > to control the
ON/OFF of the master unit.
• < > The master unit flash
firing is ON.
• < > The master unit flash
firing is OFF.
1. If you have a Viper TTL, start
the DCM matching with the
Viper TTL
• Turn < ON > the Viper TTL
transmitter whilst holidng
down the < test > button
and release <test> button
after 2 seconds
• The Viper LCD will show <
Co di ng>
2. If you are not using a Viper
TTL and only wish to DCM
several Modus 600RT, then
use any Modus 600RT as the
Master unit
• Press <Function Button
1> whilst turning < ON > the
power to the Modus 600RT
• A green LCD on the
Modus 600RT will show
< >
MASTER
3. Press <Function Button 2>
whilst turing < ON > power to
the slave Modus 600RT
> is displayed
Modus 600RT - English