Hahnel MODUS 600RT MKII Mode D'emploi page 28

SET
ETTL: Shooting Flash Ratio A:B C
C
1. Setting the slave group <C>
• Use the same method of step 1 (Page 32) to set a slave unit to
flash group <C>
2 Setting <RATIO A:B C>
• Use the same method of step 2 and step 3 (Page 32) to set the
master unit as <RATIO A:B C>
3 Setting flash exposure compensation for group <C>
• Press Function Button 3 <
the select dial to set the amount of flash ratio for groups A and B,
and the amount of flash exposure compensation for group C
• You can add a group C to firing groups A and B. C can have separate
FEC setting which is usefull to eliminate subject shadows or other
effect's.
28
3. Setting <RATIO A:B>
• Press Function Button 2 <
A:B> is displayed
4. Setting flash ratio
• Press Function Button 3 <
• Turn the Select Dial to set
the amount of flash ratio
and press <SET> button to
confirm
5. Taking the picture
• The slave units will flash
according to the flash ratio
A B
> to select A: B or C then use
Gr
> so that <RATIO
RATIO
>
Gr
Modus 600RT - English