Change Of Door Opening Direction - AEG Electrolux S 64190 KA1 Mode D'emploi

Change of door opening direction

Should the setting-up place or handling demand it, door-
opening direction can be refitted from right-handed to left-
handed.
Following operations are to be done on the basis of figures
and explanations:
Pull out the plug from the mains socket.
Tilt back the appliance carefully being careful so that
the compressor can not touch the floor. It is recom-
mended to ask another person for help, who can keep
the appliance at this position safely.
Unscrew the adjustable feet situated on both sides (2
pieces), in addition the screws fixing the lower door
holders (2 pieces) respectively the screw on the other
side.
Put over the pin in the lower door holding plate in the
direction of the arrow.
Fix the plate on the other side leaving the position of the
door unchanged.
Then screw in the one screw in the place set free on the
other side as well as the adjustable feet (2 pieces)
and set up the box.
For refitting the upper door holder take out the screws
(2 pieces) fixing the plastic top on the back of the box.
Push back the top and lift it from the fixing elements.
Unscrew the screws fixing the upper door holder (2
pieces).
All manuals and user guides at all-guides.com
After unscrewing turn over the pin in the door holder
plate in the direction of the arrow.
Fit and fix the door holder plate on the other side with-
out displacing the door.
Put back the plastic top on the fixing elements and pull
it forward.
Fix the top with the screws (2 pieces) on the back side of
the box.
Put over the handle and the plastic nails on the other
side.
Put the appliance to its place, set it level and plug it into
the mains socket.
GB
53