Audiovox Rampage AV-301N Manuel De L'utilisateur page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
NOTE: The Antenna Trimmer only affects AM re-
ception, and will have no effect on FM
reception. The Trimmer only needs to be
adjusted when the radio is first installed and
at any time a change is made to the vehicle
antenna (replacing the mast, etc.).
bm
CASSETTE DOOR
Hold the cassette with the exposed tape edge to the
right and insert it into the cassette door. Depress
fully until the cassette is engaged and begins play-
ing.
NOTE: Observe the cassette operation cautions in
the Care and Maintenance section of this
manual.
bn
FAST-FORWARD/EJECT BUTTON
This button performs two functions. To eject a
cassette, simply depress the button fully then re-
lease. The cassette will eject and radio operation
will resume.
To fast-forward the tape, depress the button half-
way in to the locked position. To stop fast-forward
and resume normal tape playback, depress the
button slightly and release. Do not press fully in or
the cassette will be ejected.
NOTE: Never leave a cassette engaged in the
player when not in use. Doing so can cause
damage to the cassette and/or mechanism
of the unit. Always press the eject button
and remove the cassette when leaving the
vehicle.
bo
CD INPUT
An audio input jack for use with portable CD players
is located on the front control panel. Using an audio
patch cable with standard 1/8" phono plugs (avail-
able at most radio supply stores), attach the audio
output from the CD player to the CD input jack on the
radio. The CD player will now operate through the
audio system of the radio using the volume, balance
and tone controls of the radio for adjustment of the
sound. Remove the patch cable from the CD input
jack to resume radio operation or cassette play.
-3-

Publicité

Table des Matières
loading

Table des Matières