Ac Current Measurements; Ac+Dc Current Measurements - koban KMIR-01 Mode D'emploi

KMIR-01

4.10. AC Current Measurements

• Insert the black test lead banana plug into the negative COM jack.
• For current measurements up to 4000μA AC, set the function switch to the yellow μA
position and insert the red test lead banana plug into the μA/mA jack.
• For current measurements up to 400mA AC, set the function switch to the yellow mA
position and insert the red test lead banana plug into the μA/mA jack.
• For current measurements up to 10A AC, set the function switch to the yellow 10A
position and insert the red test lead banana plug into the 10A jack.
• Press the MODE button to indicate " " on the display.
• Read the current in the display.
18
EN EN

4.11. AC+DC Current Measurements

• Insert the black test lead banana plug into the negative COM jack.
• For current measurements up to 4000μA AC+DC, set the function switch to the yellow
μA position and insert the red test lead banana plug into the μA/mA jack.
• For current measurements up to 400mA AC+DC, set the function switch to the yellow
mA position and insert the red test lead banana plug into the μA/mA jack.
• For current measurements up to 10A AC+DC, set the function switch to the yellow 10A
position and insert the red test lead banana plug into the 10A jack.
• Press the MODE button to indicate "
• Read the current in the display.
KMIR-01
" on the display.
19