Safety Notes; Important Notes; Spare Parts; Functions - LGB 24680 Mode D'emploi

Safety Notes

• This model may only be used with the operating system
designed for it.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This locomotive must never be supplied with power from
more than one power pack.
• Pay close attention to the safety notes in the instructions
for your operating system.
• Not for children under the age of 15.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Please see your authorized LGB dealer for repairs or

spare parts.

• http://www.maerklin.com/en/imprint.html

Functions

• This model is designed for operation on LGB two-rail DC
systems with conventional LGB DC train controllers or
power packs (DC, 0 - 24 volts).
Note: Use a locomotive controller with more than 1 amp of
train current for this model.
Multi-Train System
This model has a „D" gearbox. It can be equipped with an
LGB Multi-Train System Decoder. We strongly recommend
decoder installation by an LGB service station.
SERVICE

Lubrication

The axle bearings should be lubricated occasionally with a
small amount of Märklin-Oil (7149).
7