Calflex 21221/O-CR Installation page 34

Table des Matières

Publicité

Inserire la piastra (E) aggiungendo del silicone sul retro in modo da farla aderire alle piastrelle per evitare infiltrazioni di acqua
all' interno del muro.
Insert the plate (E) by siliconizing the back of it to make the plate stick and avoid water infiltrations in the wall.
Insérer la plaque (E) en mettant du silicone sur la face arrière pour la coller et éviter infiltrations d'eau dans la paroi.
Legen die Platte (E) ein, der Silikon auf der Rückseite hinzufügen, um Eindringen des Wasser zu meiden.
SOLO PER VERSIONE CON SUPPORTO
ONLY FOR VERSION WITH SHOWER HOLDER
UNIQUEMENT POUR VERSION AVEC SUPPORT DE DOUCHE
NUR FÜR VERSION MIT DUSCHHALTER
Prestare attenzione a non pizzicare gli o-ring. Bloccare la piastra (E) serrando il grano (E1) con chiave a brugola da 2 mm.
Make sure not to pinch the O-rings. Block the plate (E) tightening the nut (E1) with a 2 mm Allen wrench.
S'assure de ne pas pincer les joints toriques. Bloquer la plaque (E) en vissant le grain (E1) à l'aide d'une clé Allen de 2 mm.
Vermeiden Sie ein Abklemmen die O-Ring. Dem Platte (E) sichern die durch Anziehen der Madenschraube (E1) mit
Inbusschlüssel 2 mm.
34

Publicité

Table des Matières
loading

Table des Matières