Warning Symbols; Electrical Safety - Black & Decker BEMWH551 Mode D'emploi

ENGLISH
Use of an RCD reduces the risk of
electric shock.
Never pick up or carry an appliance
u
while the motor is running.

Warning symbols

The following warning symbols are found
on the appliance along with the date
code:
Warning! Read the manual prior
to operation.
Wear safety glasses or goggles
when operating this appliance.
Wear suitable ear protectors
when operating this appliance.
Do not expose the appliance to
rain or high humidity.
Always remove the plug from
the socket before cleaning or
maintenance. Be careful not to
use your appliance if the cable is
damaged.
Disconnect the mains plug if
the cord becomes damaged or
>
entangled.
Beware of flying objects. Keep
bystanders away from the
cutting area.
Keep the cable away from the
cutting blades.
10
(Original instructions)
The blades will continue to
rotate after the machine is
switched off. Wait until all
parts are stationary before
touching them.
Keep bystanders,
6m / 20ft
especially children and pets
360˚
at a distance of greater
than 6m
Avoid injury, do not place
hands or feet near
the rotating blade
Directive 2000/14/EC
guaranteed sound power.
96

Electrical safety

Warning! This tool is double
insulated; therefore no earth wire
is required.
Always check that the power supply
corresponds to the voltage on the rating
plate.
If the supply cord is damaged, it must
u
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Electric safety can be further improved
u
by using a high sensitivity 30 mA
Residual Current Device (RCD).
Features
This appliance includes some or all of the following features.
1. Upper handle
2. Motor on/off grip
3. Power button
4. Cable tidy
4a. Cable retention clips
5. Upper handle latch