Connecting The Power Inverter Using Battery Power Cord - Honeywell HW400PI Guide D'utilisation

All manuals and user guides at all-guides.com
Operation

Connecting the Power Inverter Using Battery Power Cord

Read and follow all "Safety Messages" on page 1 before connecting the power inverter.
The battery power cord is used to provide up to a total of 400 watts of power.
Connect the red positive (+)
1
ring terminal to the power inverter
positive (+) DC terminal post.
11 www.honeywellpowerinverters.com
Connect the black
2
negative (-) ring
terminal to the
power inverter
negative (-) DC
terminal post.
3
Turn the power
5
inverter on.
Confirm the LED
6
indicator is green.
Turn off the appliance
7
to be powered.
Plug in and turn
8
on the appliance.
Plug in other appliances
9
following steps 7 & 8, if desired.
NOTE: Do not exceed rated
power of the power inverter.
HW400PI Power Inverter Owner's Manual
Connect the black
negative (-) lead
to the negative (-)
battery terminal.
Connect the red
4
positive (+) lead
to the positive (+)
battery terminal.