Before Each Use - AL-KO KHS 3704 Mode D'emploi

Start-up
DANGER!
Risk of electric shock if
the log splitter is
operated without
residual current circuit
breaker
Operation of the appliance
without residual current
circuit breaker in the mains
connection can result in
serious injuries or even
death due to electric
shock.
■
Before connecting the
appliance, check
whether the mains
connection has a
residual current circuit
breaker for a maximum
leakage current of
0.03 A.
■
If you cannot be sure
that a residual current
circuit breaker is
installed: Use an
additional portable
residual current device
with switched PE
conductor.
462706_l
5.1

Before each use

WARNING!
Danger of injury if the
appliance tips over
A tipping appliance can
result in serious injury and
damage to the appliance.
■
Ensure that the
appliance cannot tip
over.
1. Carry out a visual inspection of the log
splitter.
■
The log splitter must not be put into
operation if parts of the appliance are
missing, defective or loose.
2. Carry out a visual inspection of the mains
cable.
■
A defective mains cable (e.g. with cracks,
cuts, crushed or kinked points in the
insulation) must not be used.
3. Carry out a visual inspection for leaks in the
hydraulic system.
■
The log splitter must not be put into
operation if the hydraulic system has
leaks.
4. Use suitable means to fix the appliance
securely to the ground.
5.2 Putting the log splitter into operation
(07, 08)
NOTE
The transport wheels are only intended
for transporting the log splitter.
The transport wheels must be
dismounted from the feet and mounted
in the park position.
1. Install the log splitter on level, solid ground, if
possible with a slight slope towards the
control lever (as the valves are located here).
If the log splitter slopes towards the splitting
wedge, the splitting force will be lost.
2. Lay the mains cable in such a way that it
cannot be kinked, crushed or damaged in
any other way.
37