Use And Handling Of The Electrical Tool - AL-KO KHS 3704 Mode D'emploi

GB
and refrigerators. There is
an increased risk of electric
shock if your body is earthed.
■
Keep electrical tools out of
the rain and away from
moisture. Water getting into
an electrical tool increases the
risk of an electric shock.
■
Do not use the connection
cable for incorrect
purposes such as carrying
the electrical tool, hanging
it up or for pulling the plug
out of the socket. Keep the
connection cable away from
heat, oil, sharp edges and
moving parts. Damaged or
tangled connection cables
increase the risk of electric
shock.
■
If you are working outside
with a power tool, only use
extension cables that are
also suitable for outside.
Using an extension cable that
is suitable for outside
decreases the risk of electric
shock.
■
If the operation of the power
tool in a humid environment
cannot be avoided, use a
fault current circuit breaker.
Using a fault current circuit
breaker decreases the risk of
electric shock.
34
3.7 Use and handling of the
electrical tool
■
Do not overload the power
tool. Use the appropriate
power tool for the job you
are doing. Using the
appropriate power tool will
enable you to work more
effectively and safely in the
specified performance range.
■
Do not use a power tool if it
has a defective switch. A
power tool that can no longer
be switched on or off is
dangerous and must be
repaired.
■
Disconnect the plug from
the socket and/or remove
the battery before you make
adjustments to the
appliance, replace parts or
put the power tool away.
This precautionary measure
will prevent the power tool
from starting inadvertently.
■
Keep unused power tools
out of the reach of children.
Do not allow people to use
the power tool if they are
not familiar with it or have
not read these instructions.
Power tools are dangerous if
they are used by
inexperienced people.
KHS 3704 | KHS 5204 | KHS 8552
Safety instructions