Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CLEAN THE UNIT
◾ ◾
Clear any grass that may have wrapped itself around the motor shaft or trimmer head.
◾ ◾
Use a small brush or the air discharge of a small vacuum cleaner brush to clean
the air vents on the rear housing.
◾ ◾
Keep the air vents free of obstructions.
◾ ◾
Clean the unit using a damp cloth with a mild detergent.
◾ ◾
Do not use any strong detergents on the plastic housing or the handle. They can
be damaged by certain aromatic oils, such as pine and lemon, and by solvents
such as kerosene. Moisture can also cause a shock hazard. Wipe off any moisture
with a soft dry cloth.
SHARPEN THE LINE-CUTTING BLADE
WARNING:
performing any maintenance on the line-cutting blade.
1. Remove the line-cutting blade from the guard.
2. Secure the blade in a vise.
3. Wear proper eye protection and gloves and be careful not to cut yourself.
4. Carefully file the cutting edges of the blade with a fine-tooth file or sharpening
stone, maintaining the original cutting edge angle.
5. Replace the blade on the guard and secure it in place with the two screws.
STORING THE UNIT
◾ ◾
Remove the battery pack from the trimmer.
◾ ◾
Clean the tool thoroughly before storing it.
◾ ◾
Store the unit in a dry, well-ventilated area, locked-up or up high, out of the reach
of children. Do not store the unit on or adjacent to fertilizers, gasoline, or other
chemicals.
30
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER
Always protect your hands by wearing heavy gloves when
Publicité
Table des Matières
