To Set The Time - Zodiac AquaLink PDA PS4 Mode D'emploi

Page 20
ENGLISH
5.4 Set Temperature Menu
The SET TEMP menu allows you to preset the pool and spa thermostats.
NOTE
For pool/spa combination systems, the default pool temperature is 80°F (27°C) and the default spa temperature is
102°F (39°C). For pool only/spa only systems, the default TEMP1 temperature is 80°F (27°C) and the default TEMP2
temperature is 60°F (16°C).
5.4.1 To set Pool/Spa Temperatures
Highlight MENU and press SELECT, highlight SET TEMP and press SELECT. Inside the SET TEMP menu, use the
UP/DOWN arrow keys to highlight either POOL (TEMP1) or SPA (TEMP2) and press SELECT. Use the UP/DOWN
arrow keys to increase or decrease the temperature and press SELECT to apply.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
5.5 Set Time Menu
The SET TIME menu allows the correct time and date to be entered. The correct time and date ensures that
programming will work properly.
NOTE
A nine volt (9 V) battery is located at the Power Center that allows the system clock to continue to run during power
outages. Ensure that the battery is checked or replaced annually.

5.5.1 To set the Time

Highlight MENU and press SELECT, highlight SET TIME and press SELECT. Use the UP/DOWN arrow keys to set
values. Press the SELECT button to continue.
AquaLink PDA | Installation and Operation Manual
®
SET TEMP
POOL HEAT 80°F
SPA HEAT 104°F
Highlight an
item and press
SELECT
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
SET TEMP
POOL HEAT 80°F
SPA HEAT 104°F
Highlight an
item and press
SELECT
SET TIME
2/14/05 MON
10:00 AM
Use ARROW KEYS
to set value.
Press SELECT
to continue.
SET TEMP
POOL HEAT 85°F
SPA HEAT 104°F
Highlight an
item and press
SELECT