Variable Speed Pump - Zodiac AquaLink PDA PS4 Mode D'emploi

Page 14
ENGLISH

3.10 Variable Speed Pump

NOTE
This equipment may not be part of your system. Please check with your installer.
The speed of a variable speed pump can be adjusted from the EQUIPMENT ON/OFF screen. In the example below
the SPEED PRESET #3 is adjusted to 2750 RPM.
3.10.1 To adjust the Variable Speed Pump Setting
Highlight EQUIPMENT ON/OFF and press SELECT. Highlight VSP1 SPD ADJ and press SELECT. Highlight
SPEED3 and press SELECT. Use the UP/DOWN arrow keys to set the desired speed and press SELECT to make that
speed setting take effect. Return to the main menu by using the BACK button.
EQUIPMENT
FILTER PUMP
OFF
SPA OFF
VSP1 SPD ADJ
POOL HEAT
OFF
SPA HEAT OFF
AUX 1 OFF
AUX 2 OFF
AUX 3 OFF
MORE
NOTE
Speed adjustments from the EQUIPMENT ON/OFF screen are not permanent.
AquaLink PDA | Installation and Operation Manual
®
SELECT SPEED
POOL
SPA
SPEED 3 X
SPEED 4
POOL HEAT
SPA HEAT
SOLAR HEAT
INFLOOR
MORE
SPEED 3
SET TO 2750 RPM
Use ARROW KEYS
to set value.
Press SELECT
to continue.
SPEED SELECT
POOL
SPA
SPEED 3 X
SPEED 4
POOL HEAT
SPA HEAT
SOLAR HEAT
INFLOOR
MORE