VALBERG DHP 8 A++ W205T Consignes D'utilisation page 32

C
Useful information
Problem
Anti-crease icon is lit.
Fibre filter cleaning icon
is lit.
An audible warning is heard
from the machine
Evaporator warning icon is
flashing.
The lighting inside the
drying machine turns on. (In
models with lamp)
Steam symbol is flashing.
(For the products with a
steam function)
Steam programs do not
start (For the products with
a steam function)
Cause
Anti-Crease mode that
prevents the laundry in
the drier to crease may be
activated.
Fibre filter (interior and
exterior filter) may be
unclean.
A layer may be formed on
the fibre filter pores that
leads to clogging.
Fibre filters may not be
inserted.
Filters of the machine may
not have been installed.
Evaporator front side may
be clogged with fibres.
Fibre filters may not be
inserted.
If the drying machine is
plugged to the power outlet,
the On/Off button is pressed
and the door is open; the
light turns on.
Steam tank may be empty
Steam tank may be empty,
steam tank warning icon
may light up on the screen
EN
Solution
Turn the drier off and
remove the laundry.
Wash the filters with warm
water and dry.
Wash the filters with warm
water and dry.
Insert the interior and
exterior filters to their
places.
Install the fibre filters
(internal and external) or
the environmentally-friendly
filter to their housing.
Clean the front side of the
evaporator.
Insert the
interior and exterior filters
to their places.
Unplug the drying machine
or bring the On/Off button to
Off position.
Fill the steam tank with
distilled or condensed water.
Fill the steam tank until the
steam icon goes off.