VALBERG DHP 8 A++ W205T Consignes D'utilisation page 27

C
• Open the toe board by pressing on it.
• To open the air routing door, move the release latch.
• Pull the brush to the left side and remove it. You can use
the cleaning brush for removing collected fluff on the metal
surface of the condenser.
NOTE
Brush is inside the printing materials bag. You can place it
in its housing on the air routing cover after the first usage.
• Collected fluff on condenser surface should be removed by
a damp cloth or rubbing the brush placed on the air routing
cover up and down on the condenser.
Useful information
EN