Cleaning The Equipment; Odours; Lighting - CONSTRUCTA CK841 Serie Notice D'utilisation

Masquer les pouces Voir aussi pour CK841 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Cleaning the equipment

To clean, take the variable parts out of
the appliance.
~ "Interior fittings" on page 23
Partition and vegetable container
cover
Taking out the partition
~ Fig. (
Press levers on the underside on
both sides, pull partition forwards, lift
and swivel out to the side.
Taking out the vegetable container
cover
Lift cover, pull forwards and swivel
out to the side.
Inserting vegetable container cover
and partition
~ Fig. )
Insert vegetable container cover.
1.
Insert partition.
2.
Note: In order to be able to insert
the partition, you must set the
humidity controller to the lowest air
humidity setting.
Telescopic rails
~ Fig. *
Removing telescopic rails
Pull out telescopic rail.
1.
Push lock in the direction of the
2.
arrow.
Detach telescopic rail from the rear
3.
pin.
Push telescopic rail together, push
4.
backwards above the rear pin and
disengage.
Installing telescopic rails
Place the extended telescopic rail on
1.
the front pin.
Pull the telescopic rail forwards
2.
slightly until it engages.
Insert telescopic rail on the rear pin.
3.
Push lock backwards.
4.
l

Odours

I f you experience unpleasant odours:
O d o u r s
Switch off the appliance with
1.
the On/Off button #.
Take all food out of the appliance.
2.
Clean the inside.~ "Cleaning"
3.
on page 26
Clean all packages.
4.
Seal strong smelling food in order
5.
to avoid odours from forming.
Switch the appliance on again.
6.
Store food in the appliance.
7.
Check whether the formation of
8.
odours is still occurring after
24 hours.
9

Lighting

Y our appliance features a
L i g h t i n g
maintenance-free LED light.
Only customer service or authorised
technicians may repair the light.
Odours en
27

Publicité

Table des Matières
loading

Table des Matières