Télécharger Imprimer la page

Technoline WS8014 Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Press "MODE" to confirm your setting and to end the setting procedures and enter the clock mode.
Please note:
After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal
Time Mode.
Setting the alarm
Press "+" button once, LCD displays the "
the "
" icon will disappear from the display, the alarm function is OFF.
Press "MODE" button once, LCD displays alarm (default 6:00 AL) time. Then press and hold "MODE"
button for 2 seconds until hour of the alarm time starts to flash. Use the "+" and "-" buttons to set the hour.
Press "MODE" button to confirm your setting.
The Minute of the Alarm time starts to flash. Use the "+" and "-" buttons to set the minute. Press "MODE"
button to confirm your setting.
The snooze time of the alarm starts to flash. Use the "+" and "-" buttons to set the snooze time. Snooze time
can be set from OFF to 60 minutes.
Press "MODE" button to confirm your setting and to end the setting procedure.
Please note:
After 20 seconds without pressing any button the clock switches automatically from setting mode to Normal
clock mode.
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is
heard.
Switching off the alarm signal
Press any button except the "SNZ" button to stop the alarm signal. It is not necessary to reactivate the
alarm. It switches itself automatically to the alarm time which has already been set.
Snooze function
Press the "SNZ" button the alarm signal sounds to get to Snooze mode. The alarm signal sounds again
after
the time that was set for Snooze. If OFF was selected in the Snooze time setting, the alarm will not repeat.
Switching °C or °F
Press once "-" button to switch the temperature unit to °C or °F.
Hereby, Technotrade declares that this product WS8014 is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The original EU declaration of
conformity may be found at: www.technoline.de/doc/4029665080147
SPECIFICATIONS
Power Supply: 2x LR06 (AA, Mignon) Battery
" icon, the alarm function is ON. Then press once "+" button,
EN3

Publicité

loading