Astralpool CDP V2 Serie Manuel Technique page 15

ASTRALPOOL CDP LINE V2
UNIT OFF
5.2. FIRST STARTUP
Check TABLES 6 (pg. 83) to see the actions required to startup the unit. All these operations are
made from the user interface display.
5.3. USERS MENU
Presses ''Set'' key to access the appliance submenus:
MENU ITEM
SP Set Point
SCHEDULE Schedule
ECO ECO settings
5.3.1. SET POINT MENU
Pressing ''Set'' key in the submenu SP, the screens shown in IMAGES 9.1 (pg. 98) appear.
Press keys ''Up'' and ''Down'' to navigate through the different screens.
Press ''Set'' key to access the different variables to be modified.
Press ''Set'' again to confirm the modification of any variable.
If a modification is made and do not want to confirm, press ''Esc'' key.
5.3.2. SCHEDULE MENU
This menu allows to set the schedule in which the appliance will function. See IMAGES 9.2 (pg.
99)
Remember not to use the same hour settings in different time settings.
5.3.3. ECO MENU
This menu allows to adjust the different operation modes of the appliance. See IMAGES 9.3 (pg.
100).
ECO1 and ECO2 modes cannot be selected at the same time. Once one is selected the other will
be disabled.

ECO1 MODE: This operation mode acts in conjunction with #3 time zone in the date &
time schedule. It uses temperature & humidity ECO set points in #3 time zone. This
operation mode is normally used when little or no affluence. Power saving mode.

ECO2 MODE: This mode operates independently to other settings. This mode stops the
fan when all set points are reached. From that point on, whenever a set point is not
met, the fan will function again.

AUTOMATIC: This mode defines the behavior of the appliance whenever an electrical
power supply loss occurs. If set to ''ON'' a manual reset will be needed in order to
© ASTRALPOOL 2015 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT
All manuals and user guides at all-guides.com
DESCRIPTION
Set point adjustment
Schedule adjustment
Settings of appliance's working modes
UNIT ON
.
ENGLISH
Pag: 15