Eizo FORIS FX2431 Manuel D'installation page 13

Prior to use
●
Connect an AV device
1. Connect the monitor to the AV device with a signal cable that matches the connectors.
Connectors on the
AV device
S-Video Video R L
Component video R L
HDMI connector
Attention
• When controlling the AV device connected to HDMI input of the monitor using the HDMI CEC
function, [HDMI CEC Setting] of the Setting menu is required to be set (see page 16).
Installation Setting/Adjustment
S-Video cable *
or
Video cable * 1 *
Audio cable * 1
(pin jack to pin jack)
Component video cable *
1
Audio cable *
(pin jack to pin jack)
1
HDMI cable * *
* 1
P lease purchase the cable.
* 
U se either cable to connect the monitor and the AV
device.
* 
P lease use the cable on which "High Speed HDMI
Cable" is written.
Troubleshooting
Connectors on the
1 * 2
2
Component video
1
3
HDMI connector
monitor
TM
11