Specifications; Fcc Statement - Beurer EM 44 Mode D'emploi

13. Specifications

Type: EM44
Model: SEM 44
Output wave form: Biphasic rectangular pulse
Pulse length: 50 – 360 µs
Pulse frequency: 1 – 150 Hz
Max Output Voltage: 100 Vpp (500 ohm)
Max Output Current: 200 mApp (500 ohm)
Power Supply: 3 x 1.5 V AAA batteries
Treatment Time: 5 – 100 minutes
Intensity Levels: 0 – 50
Operating Conditions: 50 °F – 104 °F (10 °C – 40 °C), relative humidity 30 – 85%
Storage Conditions: 14 °F – 122 °F (-10 °C – 50 °C), relative humidity 10 – 95%
Dimensions: 5.2 x 2.5 x 1.2 in (132 x 63 x 29.5 mm)
including belt clip
Weight: 3.5 oz (101 g) including belt clip
Electrode Pad Size: 1.8 x 1.8 in (45 x 45 mm)
Battery Life: About 15 hours

14. FCC Statement

Changes or modifications to the product not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfe-
rence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
20