Electrode Pad Usage - Beurer EM 44 Mode D'emploi

UP and DOWN
Choice of treatment program, treatment time, frequency, pulse width, operating time, and pause time.
MENU
Return to program selection screen.
ENTER
(1) Menu selection.
(2) Confirmation of a selection made using UP/DOWN, except channel intensity.
Intensity setting buttons (Ch1 +/- left, Ch2 +/- right)
Adjusts impulse intensity.
Keylock
Locks the buttons to avoid them being pressed accidentally.
(1) To activate, press and hold the button until the symbol
(2) To deactivate, press and hold the button until the symbol

7. Electrode Pad Usage

• Do not bend or fold pads. Store pads on the plastic storage sheet when not in use.
• Do not apply ointment or any solvent to the pads or to your skin.
• The pads are pre-gelled and will adhere to your skin.
• Apply the pads only to the skin or to the plastic storage sheet provided.
• Place the pads at least two inches (5 cm) apart on your skin. The pads should never touch each other.
• Always place clean pads in accordance with illustrations provided. Make sure the components are connected properly and the pads
are attached to the part of the body you wish to treat.
• Pads should not touch each other when placed onto your skin.
• Do not place on your spine or backbone.
• Pads should not touch any metal object, such as a belt buckle or necklace.
• Pads should not be placed simultaneously on the soles of both feet.
• Pads should not be placed simultaneously on the calves of both legs.
• Do not share pads with another person. This may cause a skin irritation or infection. Pads are intended for use by one person.
• Do not place or relocate the pads while the device is on. Always turn the power off before removing or changing the pad location.
• Do not leave pads attached to the skin after treatment.
• Always pull firmly on electrodes to remove them from the skin to prevent injuries in the unusual case of highly sensitive skin.
• Do not expose the device to direct sunlight or high temperatures.
is visible in the display (approx. 3 seconds).
disappears from the display (approx. 3 seconds).
10