Samsung BD-HDD Combo Manuel D'utilisation page 42

Setup
DTS Neo:6 Mode
You can enjoy multi-channel sound from an Audio
CD (CD-DA).
Off : Outputs a 2-channel audio signal through
•
the front speakers only.
Cinema : Select to play 2-channel movie sound
•
over multi-channels.
Music : Select to play 2-channel music over
•
multi-channels.
NOTE
✎
▪
If you are using an HDMI supported AV receiver, this
option is available when you set Digital Output setup
as PCM.
Audio Sync
In some cases when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
• You can set the audio delay time between 0
msec and 200 msec.
Adjust it to the optimal setting.
NOTE
✎
▪ The audio delay time you specify may not be exact
depending on the played content.
Channel
You can configure your TV channels with features
such as country and auto tune.
Antenna
Selects an appropriate type of antenna for digital
broadcasts.
Before your product can begin memorizing the
available channels, you must specify the type
of signal source that is connected to the this
product.
Air : Select Air for receiving digital broadcasts.
•
Cable : Select Cable for receiving digital
•
broadcasts.

English
Country
Select this to change the country.
Enter the desired 4-digit password using the
number buttons.
1.
Press the ►▲▼ buttons to select the desired
country, then press the ENTER button.
2. Press the RETURN button.
NOTE
✎
▪
Password
- France only : Enter the desired 4-digit password
using the number buttons.
- Other : Enter the desired 4-digit password using
the number buttons.
* Default password is set to 0000.
Auto Tuning
Scans for all channels with active broadcast
stations and stores them.
Scans for a channel automatically and stores in
the product.
Automatically allocated programme numbers may
not correspond to actual or desired programme
numbers.
If a channel is locked using the Child Lock
function, the PIN input window appears.
Air : Press the ▼ button to select the Search,
•
then press the ENTER button.
Cable : Press the ▼ button to select the Next,
•
then press the ENTER button.
Set the Search Mode option, then press the ▼
button to select the Search button.
- Search Mode (Full / Network / Quick) : Scans
for all channels with active broadcast stations
and stores them in the product.