Samsung BD-HDD Combo Manuel D'utilisation page 29

Case 2 : Connecting to an Audio
System (Stereo Amplifier)
- Good Quality
1. Using the audio cables, connect the AUDIO
OUT (white and red) terminals on the rear of
the product to the AUDIO IN (white and red)
terminals of your Stereo Amplifier.
2.
Using the video signal cable(s), connect
the HDMI, COMPONENT, or VIDEO OUT
terminals on the rear of the product to the
HDMI, COMPONENT, or VIDEO IN terminal
of your TV. (See pages 25~27)
3.
Turn on the product, TV, and Stereo Amplifier.
4.
Press the input select button of the Stereo
Amplifier to select the external input and hear
sound from the product. Refer to your
Stereo Amplifier's user manual to set the
Stereo Amplifier's audio input.
5.
Press the input selector on your TV remote
control to select the video source (HDMI,
Component, or Video.)
Red White
NOTE
✎
▪ If you use the Digital Audio connection described in Case 3, you will hear only front two speakers with Digital Output
setting as PCM.
Case 3 : Connecting to an Audio
System (AV receiver with Dolby
Digital or DTS decoder) - Better
Quality
1. Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear
of the product to the DIGITAL AUDIO IN
(OPTICAL) terminal of your AV receiver.
2.
Using the video signal cable(s), connect
the HDMI, COMPONENT, or VIDEO OUT
terminals on the rear of the product to the
HDMI, COMPONENT, or VIDEO IN terminal
of your TV. (See pages 25~27)
3.
Turn on the product, TV, and AV receiver.
4.
Press the input select button of the AV receiver
to select the external input in order to hear sound
from the product. Refer to your AV receiver's
user manual to set the AV receiver's audio input.
5.
Press the input selector on your TV remote
control to select the video source (HDMI,
Component, or Video.)
Case 2 : Audio cable
Case 3 : Optical cable
(not included)

English