Sony DXC-C33 Instructions D'utilisation page 22

4 Move the window to the desired position
on the screen with the B, b, V or v button,
and press the ENTER button.
ATW NORMAL/ATW WIDE
Activates auto-tracing white balance. The
white balance is automatically adjusted as
the color temperature changes.
These modes are suitable for shooting when
the light source changes.
Normally, set to ATW NORMAL.
The ATW WIDE setting can cope with a
wider range of color temperature changes.
R. PAINT, B. PAINT
Use the GAIN RED or BLUE controls
on the camera control unit to make fine
adjustments. Finely adjust the red or blue in
the range from –10 to +10. Adjust them
while watching the monitor screen. When
adjusted, the set values change to the
adjusted levels.
The adjusted values are stored in memory
separately from AWB values.
AREA
A detecting window appears on the monitor
screen. The setting procedure is the same as
that in AWB.
With NORMAL option, a detecting window
is displayed on the whole screen.
SPEED
Sets the focusing speed. You can select
SLOW (slow speed), MID (normal speed) or
FAST (fast speed).
MANUAL
Use for manual adjustment of white balance.
R. GAIN, B. GAIN
Use the GAIN RED or BLUE controls
on the camera control unit to adjust the red
or blue gain. The adjustable level is within
the range from – 127 to + 127. Adjust them
while watching the monitor screen. When
adjusted, the set values change to the
adjusted levels.
22
GB
WHITE BALANCE Menu
3200K
Selects for indoor shooting. (Color
temperature: 3200K)
5600K
Selects for outdoor shooting. (Color
temperature: 5600K)