Sony DXC-C33 Instructions D'utilisation page 14

FS/TRIG IN (Foot Switch/
qk
Trigger input) connector (stereo
minijack)
Connects the optional foot switch.
When the camera is in strobe mode,
connects a commercially available slave
unit.
Note
The foot switch must comply with
Standard UL2601-1/EN60601-1.
For details on the foot switch, consult
with an authorized Sony dealer.
ql EXT SYNC (external sync) (HD,
VD/SYNC) connectors (BNC
type)
Inputs reference sync signals for
synchronizing the camera operation.
When using the internal sync signals,
outputs the HD/VD or composite sync
signals.
Equipotential ground
w;
terminal
Used to connect with the equipotential
plug to bring the various parts of a
system to the same potential.
Refer to "Important safeguards/notice
for use in the medical environments" on
page 3.
AC IN socket
wa -
Connects the supplied AC power cord.
REMOTEconnector (mini
ws
DIN 8-pin)
Connects to the RM-C950 remote
control unit (not supplied).
RGB/SYNC connector (D-
wd
sub 9-pin)
Outputs RGB signals and their
respective sync signals.
S VIDEO OUTPUT
wf
connector (mini DIN 4-pin)
Outputs an S video (Y/C video) signal.
14
GB
Location and Functions of Parts and Controls